Best Barns tahoe_1216f Manual de instrucciones descargar pdf (Pagina 8)

61" Long 2x3

42-1/2" Long 2x3

34-3/4"

Blue ends

Right door

has Lap edge

Recut to

20-3/4"

Install Siding

Flush

Install Siding

Flush

1. Remove 2x4 blocks and turn the front gable frame over. Install pre-cut siding on front gable.

Siding should extend 3/4" below the bottom 2x4 plate. You can attach the loft door frames to

the gable to create a decorative look or if you want the loft doors to open, cut the siding from

the opening. Cut the siding flush with the sides of the opening. Cut siding length to 34-3/4".

Mark the siding cut from the right siding panel with the letter 'R'.

Step 5 Side Front Roof Gables

3. Recut the siding panel marked

'R' . Measure from 'LAP' edge

and cut the width to 20-3/4".

4. Install panels on door frames,

with the cut edges flush with

bottom and side of frames. The

frames will extend 3/4" above

the siding at the top.

Screw through the back of

siding with 1" wood screws.

LAP Edge

Tongue Edge extends past frame to

creates a door stop when right door is closed

Right Door

when closed

Top of D

oor Fram

Top of Door Frame

Back Side

of Siding

Tongue Edge

LAP Edge

To identify which edge we want you to use, we will refer

to the edge as either the 'LAP' Edge or the Tongue Edge.

Use 6d galv. nails where the 2x4s are flat and longer 8d

nails when the 2x4s are on edge. Spaced nails 12" apart.

Siding Extends 3/4" Below Plate

2. Install (2) two 61" and (2) two 42-1/2" long 2x3s on

the

front gable flush with the top of the gable frame.

Install the top 2x3s with the blue ends together. Use

10d sinkers.

Siding w/ Tongue Edge

Install First

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 23 24

Comentarios a estos manuales

Sin comentarios

Best Barns tahoe_1216f Manual de instrucciones Pagina 8

Comentarios a estos manuales

Relacionado con productos y manuales para No Best Barns tahoe_1216f